Soda Ash - GONE!

A quick and easy way to remove soda ash on fully cured cold process soap.
91% Isopropyl Alcohol, a toothbrush, a bit of scrubbing - no more soda ash. Fully cured bars should be hard enough not to be misshapen by the use of the toothbrush.

My Champagne and Roses Cold process 

with a good amount of soda ash on the top.

All you need is a small spritzer bottle filled with 
91% Isopropyl Alcohol and a toothbrush

Spritz the top with the Isopropyl Alcohol (about 5 or 6 spritz) 

Use the toothbrush to lightly scrub the surface to remove the ash. The toothbrush allows you to get into all the little nooks in a textured surface. Rinse and dry the toothbrush after every few bars.

Wipe dry with a paper towel and no more soda ash!

~ Faith